Oracle MICROS 700 Series User Manual

patch cord on the patch panel. Other devices on the network are unaffected by a
change to an individual connection at the patch panel.
Use appropriate cable routing and dressing fixtures in the wiring closet to eliminate
stress caused by tension and to effectively organize cables.
• Backbone Cabling
Backbone cabling is the structured cabling element that provides interconnections
between multiple wiring closets. However, in a small system that is served by an 8,
12, or 16 port switch/router, a backbone cable is not required unless the POS LAN
becomes part of an existing on-site network or requires internet access.
Fiber is the recommended solution when distances between wiring closets is
greater than 100 meters.
• Network Administration
While not shown in the illustration, it is as important as any other element of the
system. Network Administration encompasses system documentation, security,
and backing up user data.
• System Documentation
Document even the smallest systems to allow for additions, troubleshooting, and
equipment moves. Documentation includes producing a physical plan of the
system that maps out the location of each device and the wiring between each.
Implement password protection schemes on each workstation (and server, if
applicable) to prevent unauthorized use of the application software or to prevent
unauthorized access to critical data files. Implement a procedure where unique
user passwords are created and stored in a central, secure location.
Deploy procedures to change passwords at regular intervals and to remove the
passwords for users who no longer have access to the network.
• Backups
Roofs leak, pipes burst, hard disks fail, lightning strikes, and sometimes it even
strikes twice. Any number of sources can cause the loss or corruptions of data and
application files. Backing up system data and totals on a regular basis and storing
them in a safe and secure place is a critical part of Network Administration, and
speeds up the recovery process in the event something does go wrong.
Develop a procedure that defines when server backups occur, how often they are
performed, and how often backup tapes are rotated and stored. Backup tapes
stored on-site are useless if the building is flooded or burns down. Keeping a
second set of backup tapes secure and offsite is a worthwhile precaution.
Structured Cabling Examples
The two figures below show the MICROS workstations and peripherals integrated into
a structured cabling system, including an example of a Simphony single workstation
and printer installation.
• Kitchen Display System
The KDS Controller requires a Category 6 or better faceplate and patch cable. If
the 7 KVM Controller uses Ethernet, a Category 6 or better faceplate and patch
cable are required. In addition to the KDS or e7 KVM, connect all LCD Monitors to
dedicated, isolated ground AC outlets installed in accordance with the procedures
outlined in the AC Power Requirements section.
Chapter 26
Structured Cabling Examples
26-4

Oracle MICROS 700 Series Specifications

General

Brand	Oracle
Model	MICROS 700 Series
Category	Tablet
Language	English

Summary

Introduction to Oracle MICROS Hardware

MICROS Compact Workstation 310

MICROS Compact Workstation 310 Technical Specifications

Technical specifications for the Oracle MICROS Compact Workstation 310.

MICROS Compact Workstation 310 Features

Key features of the Oracle MICROS Compact Workstation 310.

MICROS Compact Workstation 310 Primary I/O Ports

Description of the primary I/O ports on the CW 310.

MICROS Flexible Stand

Information about the optional flexible stand for CW 310.

MICROS Basic Stand

Information about the optional basic stand for CW 310.

MICROS Compact Workstation 310 Accessories

List and details of accessories for CW 310.

Oracle MICROS Tablet 700 Series

MICROS Tablet 700 Series Technical Specifications

Technical specifications for the Oracle MICROS Tablet 700 Series.

MICROS Tablet 720 Features

Features specific to the MICROS Tablet 720.

MICROS Tablet 721 Features

Features specific to the MICROS Tablet 721.

MICROS Tablet Accessories

Accessories available for the MICROS Tablet 700 Series.

Replacing the Bridge Battery in the MICROS Tablet 720

Step-by-step guide to replacing the bridge battery.

MICROS Workstation 6 Series

MICROS Workstation 6 Features and Specifications

Features and technical specifications for the Workstation 6 Series.

MICROS Workstation 6 Series Primary I/O Ports

Description of primary I/O ports on Workstation 6 Series.

MICROS Workstation 6 Series Internal I/O Ports

Description of internal I/O ports on Workstation 6 Series.

MICROS Workstation 6 Series Adjustable Stand

Information on the adjustable stand for Workstation 6 Series.

MICROS Tablet E-Series 8 and E-Series 11

MICROS Tablet E-Series with MSR Sleeve Features

Features of E-Series tablets with MSR sleeves.

MICROS Tablet E-Series 8 with MSR Sleeve Connectors

Connectors for the E-Series 8 with MSR Sleeve.

MICROS Tablet R-Series

MICROS Tablet R-Series Features

Key features of the MICROS Tablet R-Series.

MICROS Tablet R-Series Connectors

Connectors for the MICROS Tablet R-Series.

MICROS Base Station

MICROS Base Station Features

Key features of the MICROS Base Station.

MICROS Base Station Connectors

Connectors for the MICROS Base Station.

MICROS Tablet Multi-Unit Charger

MICROS Tablet Multi-Unit Charger Features

Features of the MICROS Tablet Multi-Unit Charger.

MICROS PC Workstation 2015

MICROS PC Workstation 2015 Features

Key features of the MICROS PC Workstation 2015.

MICROS PC Workstation 2015 Connectors

Connectors for the MICROS PC Workstation 2015.

MICROS PC Workstation 2010

MICROS PC Workstation 2010 Features

Key features of the MICROS PC Workstation 2010.

MICROS PC Workstation 2010 Connectors

Connectors for the MICROS PC Workstation 2010.

MICROS Workstation 5A

MICROS Workstation 5A Features

Key features of the MICROS Workstation 5A.

MICROS Workstation 5A Connectors

Connectors for the MICROS Workstation 5A.

MICROS Workstation 5

MICROS Workstation 5 Features

Key features of the MICROS Workstation 5.

MICROS Workstation 5 Connectors

Connectors for the MICROS Workstation 5.

MICROS Workstation 4 LX

MICROS Workstation 4 LX Features

Key features of the MICROS Workstation 4 LX.

MICROS Workstation 4 LX Connectors

Connectors for the MICROS Workstation 4 LX.

MICROS Keyboard Workstation 270

MICROS Keyboard Workstation 270 Features

Key features of the MICROS Keyboard Workstation 270.

MICROS Keyboard Workstation 270 Connectors

Connectors for the MICROS Keyboard Workstation 270.

Order Confirmation System

Order Confirmation Controller (OCC) Features

Features of the Order Confirmation Controller (OCC).

Remote Display Unit Features and Requirements

Features and requirements for the Remote Display Unit.

Order Confirmation System Installation

Installation guide for the Order Confirmation System.

Order Confirmation Controller (OCC) Requirements

Specific requirements for the OCC.

Remote Display Pedestal Requirements

Site preparation requirements for the Remote Display Pedestal.

e7 BOC or Digital Menu and Marketing System Controller

e7 BOC Features and Requirements

Features and requirements for the e7 BOC.

Printing Devices

Ethernet Printing Setup

Information on Ethernet printer setup and connection.

RS232 Printing Setup

Information on RS232 printer setup and connection.

MICROS Integrated Device Network (IDN) Printing

Information on IDN printer setup and connection.

Peripheral Devices

10–Inch Customer Display Specifications

Technical specifications for the 10-inch customer display.

Customer Display Information

General information about customer displays.

Cash Drawer Details

Information regarding cash drawers.

Barcode Reader Functionality

Description of barcode reader function.

Coin Changer Functionality

Description of coin changer function.

Magnetic Card Reader Functionality

Description of magnetic card reader function.

Scale Usage

Information on using scales with MICROS.

Order Confirmation and Payment Terminal

Details on the OCC payment terminal.

Kitchen Display System (KDS)

Kitchen Display System Installation

Steps and requirements for KDS installation.

KDS Mounting Options

Various mounting options for KDS components.

KDS Controller Information

Details about KDS controllers.

MICROS Wired Bumpbar Installation Considerations

Considerations for installing wired bumpbars.

MICROS Wireless Bumpbar Installation Considerations

Considerations for installing wireless bumpbars.

e7 Kitchen Video Monitor Controller

e7 KVM Controller Features and Requirements

Features and requirements for the e7 KVM Controller.

e7 KVM Controller Installation

Guide for installing the e7 KVM Controller.

Environmental Requirements and Equipment Placement

Equipment Location Guidelines

Guidelines for optimal equipment location.

Foreign Materials Hazards

Risks associated with foreign materials.

Noise Induction Prevention

Methods to prevent noise induction.

Electrostatic Discharge (ESD) Precautions

Precautions against electrostatic discharge.

Humidity Requirements

Recommended humidity levels for operation.

Custom Cabinets and Enclosures Ventilation

Ventilation requirements for enclosures.

Operating and Storage Temperatures

Temperature ranges for MICROS workstations.

Lithium Ion Battery Pack Storage Considerations

Guidelines for storing lithium-ion battery packs.

AC Power Requirements

Preferred AC Power System

Recommended setup for the AC power system.

AC Power System Grounding

Proper grounding procedures for the AC power system.

Additional Methods for AC Power Supply

Alternative methods for supplying AC power.

Power Conditioned AC Power System

Details on the power conditioned AC power system.

AC Power Consumption and Volt-Amp Ratings

Power consumption and ratings for MICROS hardware.

Recommended AC Power Conditioning and UPS Equipment

UPS Product Requirements

Essential requirements for UPS usage.

PowerVar Single Phase UPS Desktop Models

Overview of PowerVar single phase desktop UPS models.

ONEAC Rack Mount UPS Models

Overview of ONEAC rack mount UPS models.

Standard Power Conditioners

Approved wall mount standard power conditioners.

POWERVAR Ground Guard Line Conditioners

Information on PowerVar Ground Guard conditioners.

Ethernet Line Protectors

Recommended Ethernet line protectors.

Estimated Desktop UPS Run Times

Estimated run times for desktop UPS systems.

Cable Requirements

Network Planning and Cabling

Introduction to network planning and cabling.

Ethernet Network Installation Guide

How to install Ethernet network cables.

Integrated Device Network (IDN) Cabling

Cabling options for IDN devices.

Kitchen Display System Site Requirements

Site requirements for KDS installation.

e7 KVM Controller Cable Requirements

Cable requirements for e7 KVM controller.

Order Confirmation System Installation Requirements

Requirements for OCC system installation.

Recommended MICROS RS422 ION Network Cables

Recommended RS422 cabling for ION Networks.

Wireless Infrastructure

Network Requirements and Planning

Reduced Cable Costs Benefits

Advantages of reduced cable costs in networking.

Network Troubleshooting and Security Benefits

Benefits of network fault isolation and security.

Structured Cabling Systems Overview

General overview of structured cabling systems.

Elements of a Structured Cabling System

Detailed breakdown of structured cabling system elements.

Structured Cabling Examples

Practical examples of structured cabling.

Ethernet Network Installation

Ethernet Network Topology

Description of Ethernet network topology.

Ethernet Cable Run Guidelines

Guidelines for Ethernet cable runs.

Cable Runs for Workstations, Printers, KDS, OCC

Specific cable run details for various devices.

LAN Cable Termination Methods

Methods for terminating LAN cables.

Extending Ethernet with Fiber Optic Cable

Using fiber optics to extend Ethernet beyond limits.

Integrated Device Network (IDN) Installation

Recommended MICROS RS422 ION Network Cables

Recommended RS422 cables for MICROS IDN.

Traditional MICROS RS422 Cabling and Connection Hardware

Traditional MICROS IDN connection hardware.

Shielded Cable and Connection Hardware for IDN

Shielded cabling and hardware for IDN.

Terminating the IDN Cable

Procedure for terminating IDN cables.

Equipment Dimensions

MICROS Compact Workstation 310 Dimensions

Dimensional drawings for CW 310 with stands.

MICROS Tablet 720/721 Dimensions

Front and side dimensions for Tablets 720 and 721.

MICROS Tablet 700 Series Charger Dimensions

Dimensions for 4-Bay Tablet and Battery Chargers.

MICROS Workstation 6 Series Dimensions

Various dimensions for Workstation 6 Series.

MICROS Tablet E-Series Dimensions

Dimensions for Tablets E-Series 8 and 11.

MICROS Tablet E-Series Multi-Unit Charger Dimensions

Dimensions for E-Series multi-unit chargers.

MICROS Tablet R-Series Dimensions

Dimensions for Tablet R-Series.

MICROS Tablet R-Series Base Station Dimensions

Dimensions for R-Series Base Station with peripherals.

MICROS PC Workstation 2015 Dimensions

Various dimensions for PC Workstation 2015.

MICROS Workstation 5/5A Dimensions

Various dimensions for Workstation 5/5A.

MICROS Workstation 4/4 LX Dimensions

Various dimensions for Workstation 4/4 LX.

MICROS KW270 Dimensions

Dimensions for MICROS KW270.

Order Confirmation System Dimensions

Dimensions for OCC system components.

Bumpbar Mounting Bracket Dimensions

Mounting bracket dimensions for bumpbars.

Printer Dimensions

Dimensions for various MICROS printers.

Customer Display Pole Mount Dimensions

Dimensions for Pole Mount Customer Displays.

Cash Drawer Dimensions

Dimensions for MICROS Cash Drawers.

Connectors

RS422-A, RS422-B, or IDN Connector Configuration

Configuration and pin-out for RS422/IDN connectors.

Modular RS232 COM / Powered RJ45 Port Diagram

Pin-out diagram for modular RS232/RJ45 ports.

RS232 DB9 Connector Details

Information on the RS232 DB9 connector.

Cash Drawer Connectors (1 & 2)

Details on cash drawer connectors.

Pole Customer Display Connector

Connector for the pole customer display.

Hook-Up Cables

Null Modem Cable for e7 KVM Controller

Diagram and pin-outs for the null modem cable.

IDN Port Conversion Cables

Diagrams for IDN port conversion cables.

8-Pin to 6-Pin Hook-up RS422 Cable

Diagram for 8-pin to 6-pin RS422 hook-up cable.

IDN to EIA/TIA-568-A Patch Cable

Diagram for IDN to EIA/TIA-568-A patch cable.

FCC/DOC Statement

Federal Communications Commission Radio Frequency Interference Statement

FCC statement on radio frequency interference.

Canadian Department of Communications Statement

Canadian DOC statement on radio noise emissions.