30
Connectors
The following connectors are located on the IO Panel of the Workstations, except
where noted.
To see more information about each Oracle MICROS Workstation, refer to the
following Setup Guides:
• Workstation 4 LX Setup Guide
• Workstation 5A Setup Guide
• PC Workstation 2015 Setup Guide
• Order Confirmation System Setup Guide
• MICROS Tablet R-Series Setup Guide
• Workstation 6 Series Setup Guide
• RS422-A, RS422-B or IDN
• Modular RS232 COM or Powered RJ45 Port Diagram
• RS232 DB9 Connector
• Cash Drawer 1 and 2 Connectors
• Pole Customer Display Connector
RS422-A, RS422-B or IDN
Over time two labels have been used to denote this multifunction Serial Port.
Workstations such as the WS 4 LX and KW270 include two ports labeled RS422-A
and RS422-B. Later workstations including the WS 6, WS 5A, PCWS 2015, and Base
Station include a single RS422 port labeled ‘IDN’.
The IDN (COM4) and RS422-A/RS422-B (COM4 and COM5) ports are functionally
equivalent, and default to RS422 mode in order to drive MICROS IDN printers. The
figure below shows the pin-out of the RS422 configuration. The POS application can
convert this port to a simple two- wire RS232 interface for driving serial peripherals.
Port Configured for driving RS422 IDN Devices – IDN (+)
The figure below shows the pin configuration of this port when driving IDN devices.
30-1
To Next Page
Loading...
Need help?
General
