Table 23-2 (Cont.) Recommended ONEAC Rack Mount UPS Models
Feature ON1000XAU-SN ON2000XAU-SN
Capacity (VA/Watts) 1000/ 700 1920/1345
Input-Output Voltage (VAC) 120-120 120-120
Load Current (Amps) 8.30 16.00
Frequency (Hz) 60 60
Outlets 8 8
Size (in.) (HxWxD) 3.5 x 17.3 x 19.5 7.0 x 17.3 x 19.5
Shipping Weight (lbs.) 65 114
Standard Power Conditioners
The standard Power Conditioner features a low-impedance isolation transformer to
protect the equipment from common-mode voltage, which can cause everything from
equipment lock-ups to data losses. These models also feature surge suppression and
power line filters to eliminate noise, spikes, and transients before they have a chance
to damage equipment. Some additional features include:
• All North American models have UL and cUL listings. International Models are
safety agency listed and carry the CE mark.
• Let-through voltage is <10 Volts normal mode and < .5 volts neutral to ground
when tested to ANSI/IEEE C62.41.
• Red flashing LED warns if the AC outlet is missing its input safety ground.
Figure 23-2 Approved Wall Mount PowerVar Standard Power Conditioners
The table below shows the approved power conditioners with the VA rating, output
current, Oracle MICROS part number (PN), and number of outlets for equipment.
Table 23-3 Approved Wall Mount PowerVar Standard Power Conditioners
Feature ABC065 ABC100-11W ABC150-11W ABC302-11W
MICROS Part
Number
700247-074-PT 700247-076-PT 700247-078-PT 700247-079-PT
VA Rating 78 120 180 360
Chapter 23
Standard Power Conditioners
23-3
To Next Page
Loading...
Need help?
General
