Verify the UEFI Optimal Defaults
Note - The BIOS screen might take a while to appear. Please be patient.
Note - The next events occur very quickly; therefore, focused attention is needed for the
following steps. Watch carefully for these messages as they appear on the screen for a brief
time. You might want to enlarge the size of your screen to eliminate scroll bars.
2.
When prompted in the BIOS screen, press the F2 key to access the BIOS Setup
Utility.
[Setup Selected] and the Boot Mode (Legacy or UEFI) are displayed at the bottom of the
BIOS screen, then the BIOS Setup Utility appears.
Preparing to Install the Windows Server Operating System 27
To Next Page
Loading...
