Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
The server begins the boot process and the BIOS screen appears.
Note - The next event occurs very quickly; therefore, focused attention is needed for the
following steps. Watch carefully for these messages as they appear on the screen for a brief
time. You might want to enlarge the size of your screen to eliminate scroll bars.
3.
In the BIOS screen, press the F8 key to specify a temporary boot device for the
Windows OSinstallation.
[Boot Pop Up Menu Selected] appears at the bottom of the BIOS screen, and then the Please
Select Boot Device menu appears. The screen that appears will be different depending on
whether you have the UEFI/BIOS Boot Mode configured for Legacy BIOS or UEFI.
■
For Legacy BIOS mode, a screen similar to the following appears:
40 Oracle Server X5-2 Installation Guide for Windows Server Operating Systems • April 2016
To Next Page
Loading...
