Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote Media
12.
In the Load Driver dialog, do the following:
a.
Ensure that the drivers are accessible according to the installation method
chosen (described in “Selecting the Boot Media Option” on page 14).
For example:
■
Storage drivers are on a disk mounted as a device from the remote console.
■
Storage drivers are on a local physical storage media, such as the Oracle System
Assistant USB flash drive (if installed), which is mounted internally in the server’s
chassis; a CD/DVD; or virtual media mounted from the remote console.
b.
In the Load Driver dialog, click Browse to navigate to the appropriate driver
media folder as described below.
■
For a system configured with the Oracle Storage 12 Gb/s SAS PCIe HBA External
option, navigate to the following directory on the internal Oracle System Assistant
USB flash drive to load the appropriate driver: Windows/2012/Drivers/LSI-HBA-MPT3.
c.
In the Browse for Folder dialog, select the appropriate driver, then click OK to
load the driver.
Installing a Windows Server Operating System 51
To Next Page
Loading...
