Oracle StorageTek SL8500 - Page 135

cleaning
Command Line Interface Reference B-5
Example:
SL8500> cleaning export 1,2,55,2,0 1,4,-52,1,12
requestId
requestId 9601
Address 1.4.-52.1.12
Success Cartridge Exported
Volume Label CLN002CU
Message CAP open(ing). Remove cartridges, then close CAP.Use CONTINUE cmd to
proceed...
Done
Failure Count 0
Success Count 1
COMPLETED
cleaning threshold list
Displays a list of cleaning cartridge types and their warning thresholds. Each cleaning
cartridge type has 4 attributes:
■ Index - cleaning cartridge type used by the "cleaning threshold set" command
■ Media type - the type of cleaning cartridge used
■ Maximum usage coun t - recommended max usage by tape manufacturer
■ Warning threshold value - user-defined threshold that determines when a
warning status is set for a cleaning cartridge once its usage count reaches that
threshold.
Example:
SL8500> cleaning threshold list
requestId
requestId 15001
Attributes
Object Index 1
Media Type SgtUltrium1_Cleaning
Recommend Max Usage 100
Warning Threshold 0
Attributes
Object Index 3
Media Type T10000_Cleaning
Recommend Max Usage 50
Warning Threshold 0
cleaning threshold set <warning threshold value> <list index number>
Sets a warning threshold value for a particular cleaning cartridge type.
■ <warning threshold value> - can be any positive integer up to 1000. A value of 0
indicates no warning threshold.
■ <list index number> - cleaning cartridge type as specified by the index number from
the table listing of the "cleaning threshold list" command.
Example:
SL8500> cleaning threshold set 55 11
requestId
requestId 15101
Attributes
Object Success true
Done
COMPLETED