▼
How to Prepare for Service
Review the Sun Fire X2270 M2 Server Sun Fire X2270 M2 Server Product Notes.
The Product Notes contain update information about issues related to hardware and software.
Review the safety information. See
“Important Safety Information”on page 17.
Review ESD procedures. See
“Antistatic Procedures and Precautions”on page 18.
Power o the server. See
“How to Power O the Server”on page 28.
Disconnect the AC power cords from the rear of the server.
Power o all of the peripherals connected to the server.
Label and disconnect all cables attached to the rear of the server.
Remove the server from the rack. See
“How to Remove the Server from the Rack”on page 22.
Note – For some procedures it is not necessary to remove the server from the rack. To determine
whether to remove the server, review the procedure before proceeding.
Place the server in a location with ample space and light.
Remove the server cover. See
“How to Remove the Server Cover”on page 25.
Use a vacuum, compressed air, or an antistatic brush to clean the interior of the server so
component surfaces and server air vents are free of dust.
Caution – Potential for component damage. Do not use liquid or aerosol spray cleaners to clean
the server. Liquid has the potential for causing shorts in electrical systems.
1
2
3
4
5
6
7
8
9
10
11
Tools and Supplies Needed
21
To Next Page
Loading...
Need help?
General