Oracle Sun Fire X2270 M2 User Manual

▼
How to Use the Tools and Drivers CD
Download the Tools and Drivers CD ISO image from the server download page.
Use the ISO image to burn a CD or mount the ISO image as a virtual CD.
Boot the server from the CD or browse the contents of the CD.
▼
How to Backup Motherboard FRUID Information
Note – This information is for Oracle Service personnel only.
The Sun Fire X2270 M2 Server supports TLI and stores the TLI records in the motherboard
(MB) FRUID container, called PRIMARY and in a le on the service processor (SP) lesystem,
called BACKUP1. After adding or replacing a component in your server, you can initiate a
backup the latest TLI record information in the MB FRUID PRIMARY container to BACKUP1
on the SP lesystem using this procedure.
Enter Service mode.
To backup the PRIMARY container to the SP lesystem, enter the following command:
copypsnc PRIMARY BACKUP1
“How to Remove the Motherboard” on page 73
LED Locations and Meanings
This section contains the following topics:
■
“Front Panel System Status LEDs” on page 78
■
“Hard Drive LEDs” on page 79
■
“Rear Panel System Status LEDs” on page 80
Front Panel System Status LEDs
The Sun Fire X2270 M2 Server has three system status LEDs on both the front and rear panels of
the server. The LEDs are the Power LED, the Service Action Required LED, and the Locate LED.
1
2
3
1
2
Next Steps
LED Locations and Meanings
Sun Fire X2270 M2 Server Service Manual • January, 2012, –1278

Oracle Sun Fire X2270 M2 Specifications

General

Brand	Oracle
Model	Sun Fire X2270 M2
Category	Server
Language	English