Orban 5750 Technical Manual Operation 3-35
Any command and ‘?’ returns the status of the encoder memory for that specific
command..
Returns all settings in encoder memory.
Reports a list of available commands
Returns the current time, as read from the OPTIMOD’s real-time clock.
TIME=20:15:36
DATE=Jan.1, 2015
Returns the number of seconds remaining for the current on-air EAS alert
transmission.
Returns the EAS text currently in the RDS encoder’s memory.
Table 3-2: Queries
The command received was properly formatted and was received and executed
by the encoder.
Incoming data is not properly formatted and hence was not accepted and
executed by the encoder.
Data that has been sent either has not reached the encoder or the encoder has
no response for that command.
Table 3-3: Preset/Terminal RDS controls and defaults
Alternative Frequency Channel Numbers