EasyManua.ls Logo

Orban OPTIMOD 5750 - Test

Orban OPTIMOD 5750
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-38 Operation
67 kHz subcarriers to be processed and transmitted either directly at the transmitter site or from the studio through
a broadband wired or wireless IP STL.
As it is a composite signal, the adjustments are familiar. The 5750 offers up to four destination points for the µMPX
signal. This can be useful when one processor is feeding multiple transmitter sites in a network.
You will need an audio transport method to transmit this signal and a receiver that will accept the Digital MPX signal.
For more information on equipment that is compatible with µMPX, feel free to contact Orban support at
support@orban.com
TEST
The Test Modes screen allows you to switch between OPERATE, BYPASS, and TONE. When you switch to BYPASS or TONE,
the preset you have on air is saved and will be restored when you switch back to OPERATE.
SETUP: TEST
PARAMETER LABELS
UNITS
DEFAULT
RANGE (CCW TO CW)
STEP

Table of Contents

Related product manuals