ORBCOMM OGi User Manual

OGi Modem - Hardware Guide
© ORBCOMM Proprietary 27 T401, Version .15
Parameter
Description
in SAE J1455, section 4.3.3.2.
The remote antenna meets all of its specifications after a 30
minute, 1 m depth fresh water immersion test as detailed in IEC
60529, section 14.2.7.
Exposure to
Chemicals and Oils
The packaged antenna meets all of its specifications after a
light to moderate splash test as detailed in SAE J1455 section
4.4.3.2, for the following chemicals:
Window Washer Solvent
Gasoline
Diesel Fuel
Fuel Additives
Alcohol
Anti-Freeze Water Mixture
Degreasers
Soap and Detergents
Steam
Waxes
Kerosene
Freon
Spray Paint
Paint Strippers
Ether
Dust Control Agents (magnesium chloride)
Moisture Control Agents (calcium chloride)
Ammonia
Aluminum brightener (acid wash)
Steam Cleaning and
Pressure Washing
The packaged antenna meets all of its specifications after a
steam cleaning and pressure wash test as detailed in SAE
J1455, section 4.5.3.
Fungus
The packaged antenna meets all of its specifications after a
fungus test as detailed in SAE J1455, section 4.6.3.
Dust and Sand
Bombardment
The packaged antenna meets all of its specifications after a dust
and sand bombardment test as detailed in SAE J1455 section
4.7.3.
The remote antenna meets the acceptance conditions of IEC
60529 section 13.6.2 after a dust and sand bombardment test as
detailed in IEC 60529 section 13.4.
The RF connector at the end of the remote antenna cable
intended to be mated with the enclosed modem card was not
subjected to dust and sand bombardment during the tests.
Drop Test
The packaged antenna meets all its specifications after a
handling drop test as specified in SAE J1455 section 4.11.3.1.
Flammability
UL94, IEC 60707, 60695-11-10 and 60695-11-20

ORBCOMM OGi Specifications

General

Brand	ORBCOMM
Model	OGi
Category	Modem
Language	English