OGi Modem - Hardware Guide
T401, Version .15 vi © ORBCOMM Proprietary
Preface
Purpose
This document provides an overview of the hardware characteristics and specifications
for the OGi modem.
Errata Sheet
Refer to the SkyWave Customer Support website for updates or for an Errata Sheet that
might be available after the release of this document. Always check the website for the
most current documentation.
Audience
This document is for technical readers. It provides information to ensure successful
integration of the OGi modem.
Notation
An OEM Integrator is an ORBCOMM customer who purchases an OGi modem for
integration into their own enclosure. To become an OEM Integrator certain commercial
criteria must be met. Contact your Account Executive for further details.
Hardware components and hardware labels in this document might not be exactly as
shown and are subject to change without notice.
CAUTION This safety symbol warns of possible hazards to personnel,
equipment, or both. It includes hazards that will or can cause
personal injury, property damage, or death if the hazard is not
avoided.
Note: A note indicates information with no potential hazard. A note indicates points
of interest or provides supplementary information about a feature or task.
Numbered lists indicate a series of steps required to complete a task or function.
Bulleted lists highlight information where order or sequence is not crucial.
Reference
The content of the following documents might be useful in conjunction with this guide.
These documents are available from the downloads section at support.skywave.com or
from the OG Toolkit, which is also available from the website.
[T402] OG Interface Developer Guide
[T403] AT Interface Developer Guide
Safety Disclaimer
ORBCOMM makes no warranties, representations or guarantees that the products and
network services are suitable for any use in any hazardous environments requiring fail
To Next Page
Loading...
General