34
2. Report screen:
This screen displays test data in a table and graph. The report screen is
available in the Device menu where it collects data real-time during test, as well
as in the Results menu where the data from previously run samples is stored.
In case of a CFPP Head, the rows in the table represent individual aspirations
per sample temperature with data relevant to that aspiration (such as bath
temperature, flow up & flow down time, total test time, etc.).
TIP! Pressing a row in the table changes the current graph into a vacuum profile
graph. This shows the entire actual pressure throughout the selected aspiration.
In case of a CPPP Head, the rows in the table represent individual
measurements per sample with data relevant to that aspiration.
Sample temperature intervals can be set in the programs in the method menu.
TIP! Column order and display can be customized: Press+Hold the column
name to open a drop-down menu.
- Scroll down and tap “-“ to remove that certain column
- Or press another parameter to exchange the current column with
- Or Press+Hold a parameter from the drop-down menu to add it to the table in
a new column
To Next Page