30
EARLYSTARTFUNCTIONALITY THERMOSTATCARE
This function allows the heating or cooling system
to turn on before the programmed start time
so that the room temperature matches the set
temperature at the start time.
Example:
Your Wake time is set for 6:30 am with a
temperature of 72°. Your system will turn on before 6:30
am, so the temperature is 72° when you wake up.
Note: To turn on this function see page 17.
To prevent damage to the clear lens over the
thermostat face, use a so coon cloth and
clean with mild soap and water only.
DO NOT use paper towels or other abrasive
cloths. DO NOT spray any liquid directly
onto the thermostat.
To Next Page
Loading...
