EN
12
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the Temperature and
Humidity readings.
PROJECTOR
This product has a built-in projector for viewing the time.
The maximum projection range is 2 meters
(6 feet). The image gets larger the farther you display it.
PROJECT TIME
In a darkened room, press SNOOZE/LIGHT to display
the time for 5 seconds.
ROTATE IMAGE
The ROTATION switch is located on the back of the
projector. Rotate to adjust.
FOCUS IMAGE
The FOCUS switch is located on the back of the
projector. Rotate to adjust.
CONTINUOUS PROJECTION
The AC power adapter must be plugged in to use this
feature (
7).
Slide the Projection ON / OFF button (located on the
side of the projector) to the ON position to use this
feature.
Rising SteadyTrend Falling
ICON
NOTE
BACKLIGHT
Press SNOOZE/LIGHT to activate the backlight for
5 seconds.
RMR606HGPA_R5 9/3/04, 4:16 PM12
To Next Page
Loading...
Need help?
General
