Orion COBALT Series Installation Manual

DESCRIPTIONS
The CO 230 ,CO 430, and CO 260 are car stereo amplifiers that provide 30 and 60 watts rms power
per channel into a 4 ohm load, respectively. The CO 430 is a special model for four<hannet applica¬
tions. The CO 2100 is a car stereo amplifier that provides 100 watts rms per channel into a 4 ohm
load, or 200 watts rms per channel into a 2 ohm load in stereo. In mixed mono or summed it can
alternatively provide 350 watts rms into a 4 ohm load and may be used for subwoofer systems. The
CO 2100 features a continual low pass filter that ranges between 35 Hz and 200 Hz. Other than
power rating and physical size, these four models, shown in Fig. 1, have several features in
common, and similar electrical specifications {see Specifications on page 26).
Fig.1. CO230,CO260,CO430 and2100carstereoamplifiers.
Depending on your audio system requirements, any model Is an excellent choice for full-range
sound that will exhibit smooth highs and rich, tight bass. Or any model can be put to work a part of a
system that will drive satellite speaker sets (e g., tweeters and mid-range speakers) of sub-woofers.

Orion COBALT Series Specifications

General

Brand	Orion
Model	COBALT Series
Category	Amplifier
Language	English