- 36 - - 37 -
4.6. Selecting the Command transmission method
• ONE LCD :
Transmit Protocol Command to one MLCD.
• ALL LCD :
Transmit the Protocol command sequentially to all connected MLCD sets.
• Broadcast :
Transmit the Protocol command simultaneously to all connected MLCD sets.
•
In order to control power of specific MLCD, use "Power On/Off" button after selecting the specific MLCD.
MLCD Control - Power On/Off
•
Please wait for at least 10 seconds before executing "Power On" command after the first AC
power connection. If not, it may cause abnormal behavior.
•
Please disconnect AC power and reconnect in case of abnormal behavior.
Caution
4.7. Changing the Input source
•
Varieties of screen formations are available with screen configuration.
4.7.1. Click Play button
1. Select the input source at the Display Input Select menu.
2. The selected input source will be the applied to all LCDs by clicking
“
Play
”
button.
-
Regardless of the previous setting, the screen configuration will be changed as Individual Screen Mode.
DVI Input PC Input HDMI1 Input
HDMI2 Input DP Port Input
※
Input source is not displayed on the MSCS screen, but it is indicated by colors.
To Next Page
Loading...
