Orion OLMU-5520 - MSCS Picture and Slide Management; Picture Control Parameters; Saving;Loading Slide Configurations

- 46 - - 47 -
6. Click "Stop" button to end "Slide Control"
7. Sav
e or Load the slide configuration
-
Click "SAVE" button to save user added Slide configuration as "*.ssd" file.
-
Click "LOAD" button to open saved "*.ssd" file.
※ To view the saved screen configuration, select the list from "List Box."
※ Saved screen protocol is transmitted to MLCD by double clicking the list.
•
When you load "Slide File", previous slide configuration
and new slide configuration must be identical.
•
If they are different, the file cannot be loaded. So,
revise the new slide file configuration as previous
configuration or save as new file.
Caution
4.10.2. Picture Control
•
Register values related to display of MLCD can be changed.
•
To
use Picture Control, go to MSCS Menu

Control

Picture Control or press "Ctrl+P" using Keyboard.
•
In order to control display values, input values directly in "Edit Box" and press Enter key.
Or click -/+ button using mouse.
•
Click "Exit" button or press "Ctrl+X" using keyboard to close "Picture Control" window.
• Brightness :
The range of "Brightness" you can adjust is 0 to 100.
• Contrast :
The range of "Contrast" you can adjust is 0 to 100.
• Sharpness :
The range of "Sharpness" you can adjust is 0 to 24.
• Tint :
T
he range of "Contrast" you can adjust is -50 to 50.
• Color :
The range of "Sharpness" you can adjust is 0 to 100.
• Dimming :
The range of
“
Dimming
”
you can adjust is 0 to 100
• Color Temp :
Change the color temperature of the screen
-4000K, 6500K, 10000K, User