10
Operating Procedures
If Starting Up For the First Time, or After Prolonged Periods of Non-Us
e
If Starting Up For the First Time, or After Prolonged Periods of Non-Use
Please note the following points before starting the product for the first time, or when restarting it
after a long period of non-usage.
1.Do not run the pump dry. Ensure reliable water circulation along with product pre-operation
procedures.
2. Ensure there is no water leakage along the piping.
3. This product operates on 3-phase power. If power phases are inverted, error code
“
”
will appear
on the display when you start up the power supply. If this occurs, please contact your dealer or
service specialist for assistance.
(RKS400F1)
To Next Page
Loading...
Need help?
General
