What to do if my Orisec CP-60 shows an AC Fail error?
If your Orisec Intercom System displays an AC Fail error, it means the main power to the control panel has been disconnected or lost. Check to ensure there is not a power cut, or contact the installation company.
Why does my Orisec CP-60 show a Battery Fault?
A Battery Fault on your Orisec Intercom System indicates that the main panel battery has a low voltage or has been removed. The internal battery should be replaced every 2-3 years.
What to do if my Orisec Intercom System displays 'Zone 01 Alarm'?
If your Orisec Intercom System displays 'Zone 01 Alarm', it means that the zone has recently been alarmed and is awaiting a reset. Enter your user code and select ‘Reset Alarms’.
Why is my Orisec CP-60 showing 'Zone 01 Active'?
If your Orisec Intercom System shows 'Zone 01 Active', the zone is reporting back to the main control panel an open state. Check the device to ensure it is not a door or window that has been left open.
What to do if my Orisec CP-60 displays a tamper error?
If your Orisec Intercom System displays a tamper error, it means the device's lid is not making contact properly. Check the lid of the device to ensure it is securely fastened.
What does 'Zone 01 Masked' mean on my Orisec CP-60?
If your Orisec Intercom System displays 'Zone 01 Masked', it means the zone is reporting that an object is potentially obstructing its view. Check the area where the detector is located for anything that may be obstructing the detector.
How to fix a 'Zone 01 Tamper' error on my Orisec CP-60?
If your Orisec Intercom System displays 'Zone 01 Tamper', it indicates that the zone's lid is not making a tight connection. Check the lid of the device to ensure it is securely fastened.
What does 'Omitted Zones' mean on my Orisec CP-60?
If your Orisec Intercom System displays 'Omitted Zones', it means that a user has manually disabled certain zones from operating on the system. Ask an installer or master user to help reinstate the zones if required.
What should I do if my Orisec CP-60 prompts me to 'Confirm Devices'?
If your Orisec Intercom System prompts you to 'Confirm Devices', it means a networked device on the security system has been removed. Contact the installation company.
What to do if Orisec CP-60 shows AC Fail?
If your Orisec Intercom System displays an AC Fail message, it means the main power to the control panel has been disconnected or lost. Check to ensure there isn't a power cut, or contact the installation company.
Detailed steps for full arming and part arming the security system.
How to disarm the system and reset alarms or fault conditions.
Explains common messages displayed on the screen and their potential reasons.
Methods to resolve issues like 'Zone 01 Active', 'Masked', or 'Tamper'.
Addressing battery faults and AC power failure issues.
Guidance on resolving tamper alerts from devices like lids or keypads.
General| Brand | Orisec |
|---|---|
| Model | CP-60 |
| Category | Intercom System |
| Language | English |
To Next Page
