What to do if Orisec Intercom System shows Zone 01 Alarm?
If your Orisec Intercom System displays 'Zone 01 Alarm', it means the zone has recently been alarmed and is awaiting a reset. To resolve this, enter your user code and select ‘Reset Alarms’.
How to fix a tamper error on my Orisec CP-60 Intercom System?
If your Orisec Intercom System shows a tamper error for the bell, panel lid, aux, keypad, or expander, it means the device's lid isn't making proper contact. Check the lid of the device to ensure it is securely fastened.
What does 'Zone 01 Active' mean on my Orisec Intercom System?
If your Orisec Intercom System displays 'Zone 01 Active', it indicates that the zone is reporting an open state to the main control panel. Check the device to ensure it is not a door or window that has been left open.
What does 'Zone 01 Tamper' mean on my Orisec CP-60 Intercom System?
If your Orisec Intercom System displays 'Zone 01 Tamper', it indicates that the zone's lid is not making a tight connection. Check the lid of the device to ensure it is securely fastened.
What to do if Orisec CP-60 Intercom System shows 'Confirm Devices'?
If your Orisec Intercom System displays 'Confirm Devices', it means a networked device on the security system has been removed. Contact the installation company.
Detailed steps for full arming and part arming the security system.
How to disarm the system and reset alarms or fault conditions.
Explains common messages displayed on the screen and their potential reasons.
Methods to resolve issues like 'Zone 01 Active', 'Masked', or 'Tamper'.
Addressing battery faults and AC power failure issues.
Guidance on resolving tamper alerts from devices like lids or keypads.
General| Brand | Orisec |
|---|---|
| Model | CP-60 |
| Category | Intercom System |
| Language | English |
To Next Page
