EasyManua.ls Logo

Orolia Spectracom EC20S - Page 48

Orolia Spectracom EC20S
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSILON CLOCK MODEL EC20S Spectracom
User’s Manual 48
Monitored status of internal 1PPS generated from oscillator frequency:
- OK 1PPS driver operational.
- Alarm 1PPS driver failure.
13.3.2.2 SYNCHRONIZATION
12. PHASE ACCURACY
Status of the estimated phase accuracy during a holdover period:
- OK The phase accuracy is below the Alarm Phase Threshold (see
13.7.3).
- Alarm The phase accuracy is above the Alarm Phase Threshold (see
13.7.3).
13. FREQUENCY ACCURACY
Status of the estimated frequency accuracy during a holdover period:
- OK The frequency accuracy is below the Alarm Frequency Threshold
(see 13.7.3).
- Alarm The frequency accuracy is above the Alarm Frequency Threshold
(see 13.7.3).
13.3.2.3 GNSS SOURCE
14. GNSS LOCK
Performance of the 1PPS signal of the GNSS receiver:
- OK 1PPS signal of the GNSS receiver can be used as 1PPS reference
signal for disciplining operation.
- Alarm 1PPS signal of the GNSS receiver can’t be used as 1PPS
reference signal for disciplining operation.
15. ANTENNA STATUS
State of the connection to the GNSS antenna:

Table of Contents