Orolia Spectracom EC20S - System Reset; Password Change; Configuration Extraction

EPSILON CLOCK MODEL EC20S Spectracom
83 User’s Manual
13.13.1 SYSTEM RESET
To reinitialize the EC20S operational settings, two ways are possible:
87. RESET TO DEFAULT SETUP
Click on the ‘Activate’ button to reset the EC20S current settings to the factory settings.
Note that the network settings are not reset.
WARNING ALL the setup parameters (except the network parameters)
are reset to their factory setting.
Resetting to default setup may disturb the 1PPS and 10MHz
distribution !
• Reset to default setup + Clear events log:
Click on the ‘Activate’ button to reset the EC20S current settings to the factory settings and
clear the events log.
Note that the network settings are not reset.
13.13.2 PASSWORD CHANGE
To change the Admin password, the password that is required to access the setup pages.
88. NEW PASSWORD
To enter a new password.
89. CONFIRM NEW PASSWORD
To enter the password a second time to check the user input.
Click on the ‘Save configuration’ button to save the new password. Password change closes the session.
13.13.3 CONFIGURATION EXTRACTION
To extract the EC20S settings in a configuration archive file.