EasyManua.ls Logo

Orolia Spectracom EC20S - Alarms

Orolia Spectracom EC20S
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSILON CLOCK MODEL EC20S Spectracom
47 User’s Manual
7. TRACKING STATUS
Disciplining algorithm status:
- Warming up The EC20S internal oscillator is warming up.
- Tracking search The EC20S receiver is searching best disciplining conditions.
- Locked The EC20S receiver meets the ‘Locked’ conditions (see 10.2).
- Holdover The oscillator disciplining has been suspended because there is
no valid synchronization source to synchronize to.
- Forced Holdover The oscillator disciplining has been suspended upon user
request (see 13.7.3 Force Holdover).
8. SYNCHRONIZATION TIME
Time during which the EC20S is synchronized to a valid synchronization source. Unity:
second.
13.3.2 ALARMS
13.3.2.1 SOURCE DISCIPLINING : <TYPE OF OSCILLATOR>
9. TYPE OF OSCILLATOR
Type of the built-in oscillator:
- Unknown The built-in oscillator is not detected.
- OCXO The built-in oscillator is an OCXO oscillator.
- Rubidium The built-in oscillator is a Rubidium oscillator.
10. INTERNAL OSCILLATOR
Monitored status of the 10MHz generated by internal oscillator:
- OK Frequency driver operational.
- Alarm Frequency driver failure.
11. INTERNAL 1PPS

Table of Contents