Orolia Spectracom EC20S - 15 Command Line Interface (Cli); Network Settings

EPSILON CLOCK MODEL EC20S Spectracom
User’s Manual 94
15. COMMAND LINE INTERFA CE (CLI)
Some commands are available using a Command Line Interface accessible by the connector ‘ALARMS’ of
the rear panel.
Open a RS232 serial session with the following settings:
- Speed : 9600
- Parity : None
- Data size : 8 bits
- Stop bit : 1
Type ‘Return’ and the following menu is displayed:
15.1 NETWORK SETTINGS
NOTA: Network addresses and network masks shall be input using the format: xxx.yyy.zzz.www (xxx:
decimal value in range [0,255] ; yyy: decimal value in range [0,255] ; zzz: decimal value in range [0,255] ;
www: decimal value in range [0,255]).