Orolia Spectracom EC20S - Page 95

EPSILON CLOCK MODEL EC20S Spectracom
95 User’s Manual
Menu description:
1 – Use of DHCP
DHCP service can be disabled (n = No) or enabled (y = Yes).
2 – Static IP address
To set the static IP address of the EC20S.
3 – Sub-network mask
To set the sub-network mask of the EC20S.
4 – Sub-network address
To set the sub-network address of the EC20S.
5 – Broadcast address
To set the broadcast address of the EC20S.
6 – Default gateway address
To set the broadcast address of the EC20S.
9 – Default network setup
To reset the network settings to the default settings:
NOTA: To validate the network settings, the EC20S shall be restarted using the menu:
0 – Reboot system