EPSILON CLOCK MODEL EC20S Spectracom
User’s Manual 52
- Disabled The 10MHz/1PPS output is not available in the EC20S device
model.
13.3.4 GNSS STATUS
22. GNSS RECEIVER MODEL
The GNSS receiver model implemented in the EC20S equipment is displayed in the “GNSS
Status” header.
23. GNSS LONGITUDE
Current longitude of the GNSS antenna.
24. GNSS LATITUDE
Current latitude of the GNSS antenna.
25. GNSS ALTITUDE
Current altitude of the GNSS antenna.
26. SELF SURVEY
Not applicable in ‘Stationary’ and ‘Mobile’ GNSS modes (see 78).
In ‘Automatic’ GNSS mode, the Self Survey status reports the progression of the period
during which the accurate position of the stationary GNSS antenna is computed by the
EC20S (see 78). The following information can be seen:
- x% < 100% The calculation of the accurate GNSS antenna position is in
progress.
- 100% The calculation of the accurate GNSS antenna position is
complete.
27. USED SATELLITES
Number of GNSS channels used by the GNSS receiver to compute the time and/or the
position.
28. CONSTELLATIONS
Satellites constellations:
To Next Page
Loading...
General