EPSILON CLOCK MODEL EC20S Spectracom
User’s Manual 56
13.5 NETWORK SETUP PAGE
This page allows the user to modify the Network settings.
34. HOST NAME
Unique name of the EC20S in the network. This functionality depends on the DNS server
type. NOTA: The header of the EC20S Application Window is built as follows: <Host name> -
EC20S.
35. USE DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL)
Yes A Dynamic Host Configuration Protocol service is available. In this case, a
dynamic IP address is automatically allocated to the EC20S by the DHCP server
according to the EC20S MAC address. The other input fields do not apply.
When the DHCP service is required (‘Use DHCP’=’Yes’), if the EC20S starts without network connection,
the static IP address is set. After the network connection is restored, a 1 or 2 minutes delay occurs
before a dynamic IP address is assigned.
No No Dynamic Host Configuration Protocol service is available. In this case, the
static IP address is allocated to the EC20S and the other input fields are applied
to configure the network access.
To Next Page
Loading...