EPSILON CLOCK MODEL EC20S Spectracom
57 User’s Manual
36. IP ADDRESS, SUB-NETWORK MASK, SUB-NETWORK ADDRESS, BROADCAST ADDRESS,
DEFAULT GATEWAY:
When the DHCP service is not required (‘Use DHCP’=’No’), these input fields are applied to
configure the network access.
NOTA: The network configuration can be reset to factory settings at any time while pressing, more
than 2 seconds, the ‘Factory Reset’ button located on the front panel between the ‘PWR’ and ‘SRC’
LEDs. To press the button, insert a straightened paperclip into the hole.
To Next Page
Loading...