ORTEA SpA MAT200 aug21
3 / 24
CONFORMITY DECLARATION
The Manufacturer,
ORTEA SpA
Via dei Chiosi, 21 20873 Cavenago Brianza (MB) – ITALY
Tel.: ++39 02 95917800 Fax: ++39 02 95917801
www.ortea.com - ortea@ortea.com
under its own responsibility and in the person of its Legal Representative
DECLARES
that the products:
3-PHASE VOLTAGE STABILISERS
identified with the name:
ORION PLUS (code SPxxxxxxxxxxxxx)
provided that they are installed, maintained and used for the purpose for which they have been designed and
built according to good professional practice and in conformity with the Manufacturer’s instructions,
COMPLY
with the requirements contained in the | EUROPEAN DIRECTIVES:
2014/30/EU (EMC DIRECTIVE)
2014/35/EU (LOW VOLTAGE DIRECTIVE)
2011/65/EU (ROHS RECAST)
as complying with the relevant parts of the Harmonised Standards:
EN 61439-1 (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 1: GENERAL RULES)
EN 61439-2 (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 2: POWER SWITCHGEAR AND CONTROLGEAR
ASSEMBLIES
The Manufacturer also
DECLARES
that the units are built with suitable quality components and that the manufacturing process is constantly
verified in accordance with the Quality Control Plans which the Company applies in compliance with the
ISO9001:2015 Standard.
The Company's commitment towards environmental issues and safety at work matters is guaranteed by the
certification of the Management System according to the ISO14001:2015 and ISO45001:2018 Standards.
The General Sales Conditions, which include the warranty terms, can be downloaded either via
the QR code or from the website www.next.ortea.com
To Next Page
Loading...