ORTEA SpA MAT200 aug21
7 / 24
4 HANDLING
4.1 PACKAGING
The units can be packaged either in cardboard boxes strapped to a pallet and wound in plastic film or in a wooden crate with
seaworthy vacuum bag. Each unit is provided with a label indicating nominal data, consignee data and purchasing order
details. The package bears the usual pictograms (S;U;V) and, in case of wooden crate, the indication of the lifting points
for chains or fork-lift trucks. With cardboard box packaging, anti-shock and anti-tilting indicators are also affixed.
4.2 RECEPTION
At reception, check the integrity of the packaging and the absence of evident damage occurred during transport. If the unit
does not require immediate installation, store it with its original packaging. Once the good condition of the delivery has been
established, unpack the unit and check it. In the unlikely event of damage, notify the Manufacturer in writing immediately.
4.3 STORAGE
Should the unit be stored, ensure that it is kept sheltered from rain or snow, excessive humidity, adverse climatic conditions
(atmospheric pollution, saline atmosphere, parasites, etc.) at a temperature between -5°C and 40°C.
4.4 MOVING THE UNIT
WARNING THE UNIT MUST BE KEPT IN VERTICAL POSITION, AS INDICATED ON THE PACKAGING. LAYING IT DOWN INTO A
HORIZONTAL POSITION MIGHT SERIOUSLY DAMAGE THE INTERNAL COMPONENTS, ALTER THE MECHANICAL STABILITY AND
COMPROMISE THE FUNCTIONALITY.
Unloading and moving operations are under the User’s responsibility. Take the utmost care in order to avoid damage to
whoever might be around the unit, to the unit itself and to belongings or other equipment on the installation site.
Unloading and moving operations can be performed via cranes fitted with chains or lifting brackets or fork-lift trucks
The lifting devices must be suitable to the unit weight, in good conditions and regularly checked and maintained.
If required by the weight distribution inside the cabinet, the lifting points are highlighted by means of stickers (black arrow
on yellow field).
DANGER HANDLING OPERATIONS MUST BE CARRIED OUT ONLY BY AUTHORISED, SUITABLY TRAINED PERSONNEL
PROVIDED WITH THE NECESSARY PERSONAL PROTECTIVE EQUIPMENT (PPE). ALWAYS OPERATE IN CONFORMITY WITH THE
SAFETY AT WORK RULES AND REGULATIONS ENFORCED IN THE COUNTRY OF INSTALLATION AND WITH THE INSTRUCTION
MANUALS OF THE TOOLS USED. THE MANUFACTURER SHALL NOT BE HELD LIABLE FOR ANY DAMAGE THAT MIGHT OCCUR
TO PEOPLE OR BELONGINGS DUE TO FAILURE IN COMPLYING WITH WHAT STATED ABOVE DURING UNLOADING AND MOVING
OPERATIONS.
To Next Page
Loading...