ORTEC digiBASE-E - Page 64

digiBASE-E™ High-Performance Power-over-Ethernet Multichannel Analyzer / PMT Base for Scintillation Detectors
58
SHOW_TRUE
Reports the contents of the true-time counter in units of 20 ms (50 ticks/s). See also
CLEAR_COUNTERS and SET_TRUE.
Responses:
$G0000000000075<CR> True time reported as 0 ticks.
$G0000000001076<CR> True time reported as 1 tick (20 ms).
... ...
$G4294967295132<CR> True time reported as 4294967295 ticks (over 23000 days).
SHOW_TRUE_PRESET
Reports the current true-time preset in units of 20 ms (50 ticks/s). See also
CLEAR_PRESETS and SET_TRUE_PRESET.
Responses:
$G0000000000075<CR> True time preset reported as disabled.
$G0000000001076<CR> True time preset reported as 1 tick.
... ...
$G4294967295132<CR> True time preset reported as 4294967295 ticks.
SHOW_TRUE_REMAINING
Reports the current true time remaining in units of 20 milliseconds (50 ticks per second). See
also SET_TRUE_REMAINING.
Responses
:
$G0000000000075<CR> True time remaining reported as disabled.
$G0000000001076<CR> True time remaining reported as 1 tick.
... ...
$G4294967295132<CR> True time remaining reported as 4294967295 ticks.
SHOW_ULD
Returns the value of the ULD, in channels, as a $C record.
Example Responses:
$C01023093 The ULD is 1023.
SHOW_VERSION
Reports the digiBASE-E firmware version number in the form
Fmmmm-vvv<CR>
where mmmm is a 4-character model designator and vvv is a 3-character version designator.
Example Responses:
$FDBEE-220<CR> digiBASE-E firmware version 2.2 reported.