Monitor Settings
41
Figure 5.2-16 UPDATE
At last, please restart the device by manual.
2. FACTORY RESET
Select
system
FACTORY RESET
EXECUTE FACTORY RESET
item to initialize the settings to default values, it will pop up a prompt,
as shown in Figure 5.2-17 , scroll right to select
RESET
command,
and press the joystick straight down to confirm the selection.
Please pay some patience during the reset operation, and it lasts
about one minute. The device will be in black screen mode for a short
time after confirming reset operation, and then it will display the Boot
Screen for successful reset operation, as shown in Figure 5.2-18. At
last, please restart the device by manual.
Figure 5.2-17 Prompt for Factory Reset
To Next Page
Loading...
