Scenes and Tools
48
Figure 6.1-5 Area Marker
3. Set Anamorphic Ratio
This feature enables you to de-squeeze signals coming from camera
utilizing anamorphic lenses that may not have a built-in de-squeeze
feature of their own. This is quite useful in applications, such as
outdoor post production, onset monitoring, real-time de-squeezing,
etc.
The valid area which will fill the screen is controlled by the ratio
selection, set
FRAME
ANAMORPHIC
OPTIONS
item, scroll left
or right to cycle through these anamorphic ratios: 1.33X, 1.4X, 1.5X,
1.6X, 1.8X, 1.9X, 2X. At last, scroll straight down to confirm the
selection. There will be black blank area at the surrounding of the
image.
The resolution of the input and output are as shown in Table 6.1-2:
Table 6.1-2 Resolution Relationship Between Input and Output
To Next Page
Loading...
