10 of 25
3.0 Inputs and Finishing Options
3.1 LP Remote Electrode Domes
The electrode domes will be assembled into the silicone
using the parts shown in figure 14.
Figure 15 shows how the dome will look once fabricated
into the silicone.
3.2 Check Socket Electrodes
During the check socket process, the check socket elec-
trodes shown in figure 16 may be used.
This allows the position of the electrode to be moved dur-
ing the test fitting stage.
Lamination
Dome Dummy
Silicone
Dome Dummy
Single Suspension
Double Suspension
Fig. 14:
Fig. 15:
Fig. 16:
To Next Page
Loading...
Need help?
General
