Ossur i-digits Component Assembly Guide

3 of 25
1.0 Wristband, Dummy Positioning and Digit Assembly 4
1.1 Positioning of the Socket Terminal Dummy 4
1.2 Removal of the Digit from the Knuckle 5
1.3 Extra Small and Medium Digit Assembly 5
1.4 Knuckle Mounting Plate 6
1.5 Attachment of the Knuckle Mounting Plate 7
1.6 Attachment of the Digit to the Knuckle Assembly 7
2.0 Transfer of Alignment 8
2.1 Thumb Alignment 8
2.2 Knuckle Dummies 8
3.0 Inputs and Finishing Options 10
3.1 LP Remote Electrode Domes 10
3.2 Check Socket Electrodes 10
3.3 LP Compact Electrode 11
3.4 FSR 11
3.5 Knuckle Fairing Options 12
4.0 Assembly 13
4.1 Thumb Rotator Assembly – Setting and Assembly 13
4.2 Attaching the Thumb 14
4.3 Wristband Wiring Connections 16
4.4 Connecting the Digits to the Wristband 17
4.5 Removing the Digit Wires 18
4.6 Connecting the Electrodes to the Wristband 18
4.7 Removing the Electrode Cables 20
4.8 FSR PCB 21
4.9 Completing the Wristband Assembly 22
5.0 Digit Covers 24
5.1 Attaching the Digit Covers 24

Ossur i-digits Specifications

General

Brand	Ossur
Model	i-digits
Category	Medical Equipment
Language	English