24 of 27 25 of 27
Use of this equipment adjacent to or stacked with other
equipment should be avoided because it could result
in improper operation. If such use is necessary, this
equipment and the other equipment should be ob-
served to verify that they are operating normally.
Use of accessories, transducers and cables other than
those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic
emissions or decreased electromagnetic immunity and
result in improper operation”.
The device label can be found on the side of the device.
Power supply information:
Manufacturer: PowerSolve
Model No.: 000311A
Input: 100-240Vac, 50-60Hz, 0.3A Max
Output: 8.4VDC, 1A
Failure to comply with the above guidelines will invali-
date the warranty.
Note: For advice on driving of motor vehicles,
please refer to i-limb
®
hand user manual for
Touch Bionics driving statement.