20 21
About Startup Handling Options Tinnitus Warnings More info
Clean the mould
The mould should be cleaned
regularly. Use a soft cloth to
clean the surface of the mould.
Use the MultiTool wire loop
to clean the opening.
Replace the tube
The tubing between the mould
and the hearing aid should be
replaced if it becomes yellow or
stiff. Consult your hearing care
professional about this.
Wash the mould
Make sure you are
able to identify
which mould is for
which hearing aid
before disconnect-
ing them from the
hearing aid.
Disconnect the tube
and mould from
the hook. Hold the
hook firmly when
pulling it off the
tube. Otherwise the
hearing aid may be
damaged.
Wash the mould
and tube using mild
soap. Rinse and dry
completely before
reconnecting to the
hearing aid.
Step 1
Step 2 Step 3
To Next Page
Loading...
Need help?
General
