34 35
About Startup Handling Options Tinnitus Warnings More info
Mute
Use the mute function if you
need to silence the hearing aid.
IMPORTANT NOTICE
Do not use the mute function as an off switch, as the hearing aid still
draws current from the battery in this mode.
Apply a very long
press (4 seconds)
to either end of
the button to mute
the hearing aid.
To reactivate the
hearing aid, push
the button briefly.
NOTE: the mute function only mutes the
microphone(s) on the hearing aids.
Listening state Visual* - Continuously repeated
Mute
Green, short blink Red, short blink Pause
Use hearing aids with iPhone, iPad, and iPod touch
Your hearing aids are Made for
iPhone® and allow for direct
communication and control with
iPhone, iPad® or iPod touch®.
For assistance in using these
products with your hearing aids,
please contact your hearing care
professional or visit:
www.oticon.global/connectivity
For information on compatibility,
please visit www.oticon.global/connectivity
Use of the Made for Apple badge means that an accessory has been designed to connect
specifically to the Apple product(s) identified in the badge, and has been certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards.
Apple, the Apple logo, iPhone, iPad, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
* Only optional for Opn
To Next Page
Loading...
Need help?
General
