44
HYDROFIT™ Owner’s Information Manual
WARNING: The use and ownership of this work is defined in the legend upon the front page hereof.
2. Ensure ventilation fans and grills are clean and functioning.
3. Keep all parts clean.
4. Ensure cabinet doors are locked shut after inspection.
Landing Fixtures
Turn off power before working on any fixtures.
1. Check the operation of all fixtures.
2. Ensure correct operation of the fire service switch and any other special service
switches.
Landing Entrances
Do not open doors without a barrier in place if the car is not present.
Turn off power or place the car on inspection operation and activate
the stop switch before any inspection.
1. Clean landing door tracks.
2. Check doors for free operation.
3. Check that the doors close due to gravity or spring force.
4. Check correct lock engagement and contact wipe.
5. Check for excessive play in bottom door guides (gibs).
6. Check the condition of the air cords or other coupling devices.
7. Check that all bolts are tight.
8. Check the condition of the panels for damage.
9. Check the correct setting of upthrust devices.
10. Check the condition of the tracks and the sills.
Guide Rails
1. Check the condition of all hardware, rail fastenings, and brackets.
2. Remove any debris or dust.
To Next Page
Loading...