45
HYDROFIT™ Owner’s Information Manual
WARNING: The use and ownership of this work is defined in the legend upon the front page hereof.
Car Entrance and Operator
Do not ride on the car top unless the cart is on inspection
operation. Whenever the car is stopped, immediately activate the
emergency stop switch. When working on the car doors, ensure
the main power is off.
1. Clean the car door track of any debris.
2. Check the condition of all hardware.
3. Check the condition and adjustment of the door coupling mechanism.
4. Check the door gibs for excessive movement.
5. Check the upthrust rollers for recommended clearance.
6. Check electrical cables for signs of damage.
7. Check the security of all door tracks.
8. Check the clearances between door panels and returns.
9. Ensure correct operation of the door locking mechanism.
10. Check the door closing speed and force.
11. Check the operation of the door open button and all other reversal devices.
Hoistway Switches
Do not make adjustments without a full understanding of any item.
1. Clean the switches and check the arms and rollers for free movement.
2. Check the function of all terminal switches.
3. Check the running clearance of the inductors and vanes.
Car Frame Equipment
Lock off power at the mains before inspection.
1. Clean off lint and dust.
2. Check the condition of all hardware.
To Next Page
Loading...