Otto Bock 3E80 - Product Description; Construction and Function; Combination Possibilities; Intended Use

1 Product description
English
INFORMATION
Last update: 2020-01-16
►
Please read this document carefully before using the product.
►
Follow the safety instructions to avoid injuries and damage to the product.
►
Instruct the user in the proper and safe use of the product.
►
Please keep this document in a safe place.
1.1 Construction and Function
The 3E80 prosthetic knee joint is a hydraulic prosthetic knee joint with rotation hydraulics and an
electronically controlled stance phase control. A microprocessor evaluates the signals from the
sensors installed in the prosthetic knee joint and also controls the hydraulic system.
The electronic control automatically adjusts to the patient and does not need to be adjusted by an
O&P professional. Flexion damping, extension damping and stance phase damping can be adjus
ted individually. This not only makes it possible for the patient to walk comfortably at a wide range
of speeds, the patient can also walk step-over-step over sloping surfaces, uneven terrain and
down stairs. The prosthetic knee joint also features a bicycling mode. The prosthetic knee joint
switches over to a safety mode with high flexion resistance when its battery is empty or when the
device malfunctions.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular connectors. Func
tionality with components of other manufacturers that have compatible modular connectors has
not been tested.
Limited combination options for Ottobock components
Designation Reference number
Prosthetic feet 1D35, 1C30, 1C40, 1C50, 1E56, 1E57, 1C60,
1C61, 1C62, 1C63, 1C64
Tube adapters 2R58, 2R77
Socket adapters (examples) 4R41, 4R51, 4R55, 4R111, 4R119
Foam cover 3S107
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
The product is only suitable for prosthetic fitting after a transfemoral amputation and after knee
disarticulation.
2.2 Area of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro
priate modular connectors.
m°
kg
The product is recommended for mobility grade3 (unrestricted outdoor walker)
and mobility grade4 (unrestricted outdoor walker with particularly high demands).
Approved for a body weight of up to 125kg(275 lbs).
6