Otto Bock 3E80 - Environmental Conditions; Service Life; Safety; Explanation of Warning Symbols

7
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10°C to +60°C
Relative humidity: 15% to 93%, non-condensing
Air pressure: 700hPa to 1060hPa
Storage and transport temperature range:−25°C to +65°C
Moisture: fresh water as splashing water
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, salt water, acids
Sand, highly hygroscopic particles (e.g. talcum)
2.4 Service life
This prosthetic component has been tested by the manufacturer for 3 million load cycles accord
ing to ISO 10328. Depending on the patient's activity level, this corresponds to a service life of 3
to 5 years.
3 Safety
3.1 Explanation of warning symbols
WARNING
Warning regarding possible serious risks of accident or injury.
CAUTION
Warning regarding possible risks of accident or injury.
NOTICE
Warning regarding possible technical damage.
3.2 General safety instructions
WARNING
Operation of motor vehicles
Risk of accidents due to restricted body function
►
Observe the applicable legal and insurance regulations for the operation of motor vehicles
and have your driving ability examined and certified by an authorised agency.
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
►
Use the prosthetic components according to the MOBIS classification.
CAUTION
Unallowable combination of prosthetic components
Risk of injury due to breakage or deformation of the product
►
Only combine the product with prosthetic components that are approved for that purpose.
►
Based on the instructions for use of the prosthetic components, verify that they may be com
bined with each other.