To Next PageTo Next Page
Need help?Do you have a question about the OUMAN Ouflex M and is the answer not in the manual?
General| Model | Ouflex M |
|---|---|
| Category | Controller |
| Supply voltage | 24V DC |
| Analogue inputs | 4 |
| Digital inputs | 8 |
| Analogue outputs | 2 |
| Protection class | IP20 |
| Battery | No |
| Weight | 0.5 kg |
| Communication | Ethernet |
| Connectivity | Ethernet |
| Compatibility | OUMAN products |
Configures the device's date, time, and language for accurate operation and logging.
Enables SMS communication setup for the Ouflex M device via a GSM modem.
Configures IP address, gateway, and subnet mask for Ethernet connectivity.
Adjusts display contrast and external display connection for better visibility.
Displays hardware and software versions for maintenance and support.
Sets or manages a lock code to prevent unauthorized access to device settings.
Provides options for backing up, restoring settings, and updating device software.
Displays currently active alarms, their status, and details for troubleshooting.
Logs past alarms, showing reason, source, and inactivation time for review.
Allows acknowledgment of all currently active alarms simultaneously.
Deletes the stored alarm history after confirmation.
Configures phone numbers and teams for receiving alarm notifications via SMS.
Enables or disables the audible alarm notification sound.
Sets up schedules to route alarms to specific teams based on time and day.
Shows input/output connections and their current values or states.
Lists devices connected to the bus and their associated points.
Manages time-based schedules for functions like heating, lighting, and group control.
Displays the current status of a control function and allows mode switching.
Defines time-based control sequences for daily and weekly operation.
Sets specific dates and times for temporary control mode changes.
Creates unique control programs for specific holidays or special events.
Core device configurations including room temperature and limits.
Advanced or less frequently used settings that can be toggled for simplicity.
Critical settings protected by a maintenance code for authorized changes.
Manages automatic or manual control modes for relay outputs.
Specifies the operating mode (automatic/manual) for specific control functions.
Allows renaming of controls, rooms, or groups for clearer identification.
Controls the device and retrieves information using text messages via GSM modem.
Provides remote control and monitoring capabilities via an internet interface.
Network adapter for Modbus TCP/IP and Ouman Access connection.
External display for enhanced user interface and control.
GSM modem for SMS communication and alarm notification.
