OWC data doubler Installation Guide

OWC Data Doubler Installation
32
19. Re-connect the two ribbon cables from Step 7. If you disconnected your
battery in Step 3, reconnect it now.
20. Carefully replace the bottom cover, snapping it back into place. Ax the 10
Phillips screws that were removed in Step 1; make sure the three longest
screws are inserted in their original locations.
The installation process is complete. Proceed to Section 3.1 for additional
support information.

OWC data doubler Specifications

General

Brand	OWC
Model	data doubler
Category	Computer Accessories
Language	English