Owon OW18 Series User Manual

5.To Connect with Mobile Device – Only for OW18B/OW18E
the corresponding keys of multimeter.
 Voice out function
Provide an audible out of the readings through the text-to-speech (TTS) engine on
your Android device. Click the icon on the top right of the screen to turn on
voice out. Click to turn off. In settings menu on your Android device, you can
set the language-specific voice for the spoken text, or speech rate etc.
You may change to different voices by installing different TTS engines.
TTS engines can be downloaded by scanning QR Codes or visit www.owon.com.cn .
 Upgrade Online: Click , and click "About". Click "Upgrade".
 Data Graph and Table: Click to view data graph and table. Click to
show setting menu.
Trending
graph
Zoom Controls
Data table
Show menu
Data Graph&Table
Data Graph&Table
Setting menu:
Softkey
Description
Open local file
Read the saved file (.CSV)
Save data Save the displayed data into .CSV file
Share Share the measurements via the installed sharing apps
Clear data Clear the data that is being displayed
Setting
Record Interval: Set the record interval in the application
software.
Enable Period: Log data within the defined period.
Record Period: Define the period time if the period is enabled.
Fill: Check to fill the area as blue below the data line.
Exit Exit the APP
Note: In trending graph, you can pinch the screen to zoom. The Y axis (value) can be
zoomed by gesturing along the up-down direction, and the X axis (time) can be
zoomed by gesturing along the left-right direction.
21

Owon OW18 Series Specifications

General

Brand	Owon
Model	OW18 Series
Category	Multimeter
Language	English