Owon VDS Series - Vds2062(L); Vds3102(L)

6
VDS2062(L) / VDS3102(L)






Figure 3-2 Ports of the Oscilloscope (take VDS3102(L) for instance)
1. USB port: Supply power by PC USB or the adapter; communicate with PC
2. LAN port (optional): Network port which can be used to connect with PC
3. Probe Compensation: Measurement signal (3.3 V/1 kHz) output
4. MULTI port: EXT trigger input, trigger output or Pass/Fail output
5. Signal input of Channel 2
6. Signal input of Channel 1
Note: If you use LAN port to communicate with PC, the oscilloscope should be
powered by the adapter.