PAC R6000S - Other Safety and Usage Statements

To Next Page

To Previous Page

R6000S Operation Manual: Rev. G

FIRE, HARMFUL VAPOR, SKIN IRRITANT HAZARDS!

DEATH OR SERIOUS INJURY COULD OCCUR IF NOT AVOIDED!

Some procedures in this manual may involve handling flammable liquids and

exposure to skin irritants and harmful vapors.

HOW TO PROCEED: Avoid hazard(s) by wearing appropriate Personal Protective

Equipment (PPE) such as goggles, face shields, face masks, or respirators that

should be used while performing this task or operating, servicing, or maintaining

this equipment in general. Also, determine the root cause of the potential

hazard(s) and eliminate or reduce the hazard(s) if possible. Ensure flames and

spark producing materials are kept well away from test areas. Use standard

safety procedures at all times. Consult material safety data sheets (MSDS) for

product safety, storage, and handling information.

OTHER SAFETY AND USAGE STATEMENTS

This equipment has been designed in accordance with EN 61010, “Safety Requirements for Electrical

Equipment for Measurement, Control and Laboratory Use.” It is intended for indoor use only. This

instruction manual contains information, Warnings, and Cautions that must be followed to insure safe

operation and to maintain the equipment in safe operating condition. Use of this product in a manner not

specified may impair the protection provided by the equipment.

Tests performed with this equipment may involve hazardous materials. This instruction manual does not

purport to address all safety concerns associated with these tests. It is the responsibility of the user of this

equipment to establish appropriate safety and health practices and to determine applicability limitations

prior to use.

For safe operation, this equipment must be electrically grounded by way of the protective grounding

connection in the power cord. Do not, under any circumstances, defeat the protective grounding

connection.

SAFETY

Certifications

The system and its components have been designed with safety in mind. The design applies to the use,

the conditions and the instructions described in the documentation. The system:

 Is CSA/cCSAus approved.