PAC R6000S - 5.1 Drawings

R6000S Operation Manual: Rev. G
PAC L.P., All Rights Reserved, 2015 Page 77 of 92
5. DRAWINGS AND DOCUMENTS
5.1 Drawings
The drawings described below and located on the following pages should be referenced when performing
maintenance or service on the analyzer. When separate manuals or addenda are provided for OEM
components or accessories, they should be used as references as well.
Drawing
Drawing Number
Interconnect Diagram, Detector and Furnace
(B42175-R3)
Flow Diagram, Analyzer Interconnect Detector /Furnace
(B42134-R1)
Component Ident, Front Panel Sulfur Detector Section
(B42160-R3)
Component Ident, Base Panel Sulfur Detector Section
(B42165-D)
Component Ident, Rear Panel Sulfur Detector Section
(B42166-R3)
Detector Assy, Sulfur w/Cooler
(B42025-N)
Wiring Diagram, Sulfur Detector Section – 110-120 VAC
(B42146-F)
Wiring Diagram, Sulfur Detector Section – 220-230 VAC
(B42145-E)
Component Ident, Front Panel Furnace Section
(B42159-R4)
Component Ident, Base Panel Furnace Section
(B42161-R5)
Component Ident, Rear Panel Furnace Section
(B42162-R3)
Flow Diagram, Furnace Section
(B42163-R1)
Wiring Diagram, Furnace Section – 110-120 VAC
(B42143-C)
Wiring Diagram, Furnace Section – 220-230 VAC
(B42144-R3)